In autocad drawing units also used to measure the distance. According to the drawing one drawing unit be the same as in one millimeter one inch one mile or one meter.
At the select objects prompt enter all.
How to change units in autocad mac.
Select unitless to insert the block without scaling it to match the specified units.
Scaling will be relative to the world coordinate system wcs origin and the location of the drawing origin will remain at the wcs origin.
The insertion scale is the ratio of the units used in the source block or drawing and the units used in the target drawing.
Click drafting tab modify panel scale.
As you change unit settings you can see the sample output change.
Open the drawing where it is needed to change the drawing units.
A block or a drawing that is created with units that are different from the units specified with this option is scaled when inserted.
Click format units.
This article describes how to change the drawing units in the current drawing in autocad.
To specify the display style for drawing units.
Autocad for mac setting up arch units thecadpage.
Before you go to set the format of the drawing units you must decide what drawing units to use.
Change the drawing scale to resize all objects.
Enter a scale factor.
Enter a base point of 00.
Under insertion scale select the unit that you want used to scale blocks.
You need to do this before you start so you can draw in inches and feet.
This is a short video of setting up a new drawing with arch units.
Under length select a unit type and level of precision for linear drawing units.
No comments:
Post a Comment